SPECIFICATIONS:
|
| FINISH: Stainless steel body. Cast Aluminum head structure. |
MOTORS:
| HP |
KW |
Type |
Volts |
Amps |
Hertz |
Phase |
Code |
| 1-1/2 |
1.1 |
HH |
115/230 |
21.0/10.5 |
60 |
1 |
STD |
| 1-1/2 |
1.1 |
HH |
220/440 |
5.6/2.8 |
60 |
3 |
STD |
| 1-1/2 |
1.1 |
HH |
115/230 |
20.2/10.1 |
50 |
1 |
EC |
| 1-1/2 |
1.1 |
TE |
115/230 |
16.0/8.0 |
60 |
1 |
EC |
| 1-1/2 |
1.1 |
TE |
220/440 |
5.2/2.6 |
60 |
3 |
EC |
| 1-1/2 |
1.1 |
HH |
380/415 |
3.6/3.24 |
50 |
3 |
STD |
| 1-1/2 |
1.1 |
TE |
380/415 |
3.6/3.24 |
50 |
3 |
EC |
TE=Totally Enclosed HH=High Humidity STD=Standard EC=Extra Cost
|
| SWITCH: Toggle standard 2 HP rated placed conveniently in front. |
| OPTIONS: Net Extra: Waterproof magnetic type switch. |
| BASE STRUCTURE: Unitized welded stainless steel. |
| HEAD AND DOOR: Entire assembly removable. |
| BLADE GUIDE: Upper guide assembly removable. Steel guide with long-life carbide back-up insert. |
| SAFETY PUSHER PLATE: Standard, removable. |
| DRIVE: Non slip silent V-belt. |
| PLATTER: All stainless steel held in place with two push pull hold down rods. |
| MEAT CARRIAGE: All stainless steel, with nylon guides. |
| CATCH PAN: Extra deep, rounded corners. Pan sealed off from other parts of the base. Accessible through hinged door. |
| CLEANING UNIT: Stainless steel body, long life carbide guides, steel saw cleaners, removable as a unit for easy cleaning (assembly also adjusted as a unit). |
| BEARINGS: Heavy duty taper roller bearings used in upper wheel and lower bearing housings. |
| WHEELS: 12"; cast iron upper wheel assembly lifts out. |
| LEGS: Stainless steel leg bolt levelers. |
| MOTOR COMPARTMENT: Sealed off from meat contact areas. Easily accessed through removable panel door. |
| BLADE TENSION: Adjustable, 3 inch travel ratchet gear, cam controlled embodying pound tested spring, correct tension automatically assured. |
| MEAT GAUGE PLATE: Adjustable from 1/16" to 6 1/2", locks in position, can be thrown out of gear, entire assembly removable for cleaning. |
| BLADE SPEED: Standard speed on 50 and 60 cycle operation approximately 3000 feet per minute. |
| BLADE STANDARD: 4 point 5/8 wide .020 thick 91" long. Available: 2 Point x 5/8 wide .022 thick Scallop Blade. |
| ACCEPTANCE: UL, NSF, USDA, CSA |
WEIGHT:Uncrated 308 Ibs. (140 kg) approximately
Crated 370 Ibs. (168 kg) approximately |
Loading... Please wait...
